Configuration Files

ZeppelinOS's CLI generates json files where it stores the configuration of your project.

zos.json

The first file stores the general configuration and is created by the zos init command. It has the following structure:

{
  "zosversion": "2",
  "name": <projectName>,
  "version": <version>,
  "publish": <publishFlag>,
  "contracts": {
    <contract-1-alias>: <contract-1-name>,
    <contract-2-alias>: <contract-2-name>,
    ...
    <contract-N-alias>: <contract-N-name>
  },
  "dependencies": {
    <dependency-1-name>: <dependency-1-version>,
    <dependency-2-name>: <dependency-2-version>,
    ...
    <dependency-N-name>: <dependency-N-version>
  }
}

Here, <projectName> is the name of the project, and <version> is the current semver number. The boolean value <publish> indicates whether the project should be automatically published to the network upon being pushed, allowing it to be reused as an EVM package by other projects. The field zosversion indicates the major version of ZeppelinOS you are using: zos.json files with a different major version are automatically rejected.

Once you start adding your contracts via zos add, they will be recorded under the "contracts" field, with the contract aliases as the keys (which default to the contract names), and the contract names as the values. Finally, if you link a dependency with zos link, this will be reflected in the "dependencies" field, where <dependency-name> is the name of the linked EVM Package, and <dependency-version> is its semver required version.

zos.<network>.json

ZeppelinOS will also generate a file for each of the networks you work on (local, ropsten, mainnet, etc). These should be configured in your truffle.js file, but note that zos init already configures a local network, which can be run by npx truffle develop). These files share the same structure:

{
  "zosversion": "2",
  "version": <app-version>,
  "contracts": {
    <contract-N-name>: {
      "address": <contract-N-address>,
      "constructorCode": <contract-N-constructor>,
      "bodyBytecodeHash": <contract-N-body>,
      "localBytecodeHash": <contract-N-local>,
      "deployedBytecodeHash": <contract-N-deployed>,
      "types": { ... },
      "storage": [ ... ],
      "warnings": { ... }
    },
    ...
  },
  "solidityLibs": {
    ...
  },
  "proxies": {
    <package-name>/<contract-name>: [
      {
        "address": <proxy-1-address>,
        "version": <proxy-1-version>,
        "implementation": <implementation-1-address>
      },
      ...
    ],
    ...
  },
  "app": {
    "address": <app-address>
  },
  "package": {
    "address": <package-address>
  },
  "provider": {
    "address": <provider-address>
  },
  "dependencies": {
    <dependency-name>: {
      "package": <dependency-address>,
      "version": <dependency-version>,
      "customDeploy": <dependency-custom-deploy>
    },
    ...
  }
}

The most important thing to see here are the proxies and contracts' addresses, <proxy-i-address> and <contract-i-address> respectively. What will happen is that each time you upload new versions of your logic contracts, <contract-i-address> will change. The proxy addresses, however, will stay the same, so you can interact seamlessly with the same addresses as if no change had taken place. Note that <implementation-i-address> will always point to the current contract address <contract-i-address> if the proxies are updated. Proxies are grouped by the name of the package and contract they are backed by.

For every logic contract, besides the deployment address, the following info is also tracked:

• constructorCode is the SHA256 hash of the bytecode used to CREATE the logic contract
• bodyBytecodeHash is the SHA256 hash of the same bytecode as above, stripped of its constructor
• localBytecodeHash is the SHA256 hash of the bytecode, including any Solidity library placeholders
• deployedBytecodeHash is the SHA256 hash of the bytecode, with all Solidity library placeholders replaced by their corresponding addresses
• types keeps track of all the types used in the contract or its ancestors, from basic types like uint256 to custom structs
• storage tracks the storage layout of the linearized contract, referencing the types defined in the types section, and is used for verifying that any storage layuot changes between subsequent versions are compatible
• warnings tracks any existing warnings for the contract, such as whether it has a constructor or selfdestruct operations

Any Solidity libraries used by the project's contracts are tracked in the solidityLibs node, which has the same structure as the contracts item.

Another thing to notice in these files are the version numbers. The <app-version> keeps track of the latest app version, and matches <version> from zos.json. The <proxy-i-version>s, on the other hand, keep track of which version of the contracts the proxies are pointing to. Say you deploy a contract in your app version 1.0.0, and then bump the version to 1.1.0 and push some upgraded code for that same contract. This will be reflected in the <contract-i-address>, but not yet in the proxy, which will display 1.0.0 in <proxy-i-version> and the old logic contract address in <implementation-i-address>. Once you run zos update to your contract, <proxy-i-version> will show the new 1.1.0 version, and <implementation-i-address> will point to the new <contract-i-address>. Note that this version identifier will refer to the version of the dependency (and not the app) if the proxy points to a dependent EVM package.

Also, notice the fields <app>, <package>, and <provider>. These contain the addresses of contracts that ZeppelinOS uses to facilitate the creation of proxies and the management of different versions of your contracts. These contracts will only be deployed once you publish your project to a desired network. That is, your project will not have an app, package, or provider unless explicitly running the publish command, or if the project was created with the --publish flag. Note that this step is required for projects that produce an EVM package. To read more about the architecture of contracts we are using to publish your project on-chain please refer to the Contract Architecture section.

Finally, the dependencies field stores information about linked EVM packages. For each dependency, the <dependency-address> tracks the address of the deployed package in the network, and <dependency-version> is the exact semver identifier being used for the dependency. The custom-deploy field will be present only when a version of the EVM package is deployed using the --deploy-dependencies flag of the push command, in which case <custom-deploy> will be true.

The naming of the file will be zos.<network>.json, but note that <network> is not taken from the name of the network's entry in the Truffle configuration file, but is instead inferred from the canonical network id associated to the entry. For example, if the Truffle configuration file defines the following networks:

networks: {
   geth_ropsten: {
    host: 'localhost',
    port: 8555,
    network_id: 3
  },
   parity_ropsten: {
    host: 'localhost',
    port: 8565,
    network_id: 3
  },
   local: {
    host: 'localhost',
    port: 8545,
    network_id: *
  }
 }

Using zos push --network geth_ropsten or zos push --network parity_ropsten will both produce a file named zos.ropsten.json no matter which method was used to connect to the ropsten network. ZeppelinOS will automatically detect which public network is being referred to (using web3.network.getVersion()) and use this information for determining the file name. When dealing with local networks, ZeppelinOS will generate files with dev-<network_id>, given that these networks are not public and don't have a canonical name. Using zos push --network local will produce a file named zos.dev-1540303312049.json (or some other number representing the network id of the local network).

zos.json files in version control

zos.json files should be tracked in version control. This file represents a project's ZeppelinOS configuration; the contracts and EVM packages that compose it, its name and version, the version of the ZeppelinOS CLI it uses, etc. The file should be identical for all the contributors of a project.

Public network files like zos.mainnet.json or zos.ropsten.json should also be tracked in version control. These contain valuable information about your project's status in the corresponding network; the addresses of the contract implementations that have been deployed, the addresses of the proxies that have been deployed, etc. Such files should also be identical for all the contributors of a project.

However, local network files like zos.dev-<netowrk_id>.json only represent a project's deployment in a temporary local network such as ganache-cli that are only relevant to a single contributor of the project and should not be tracked in version control.

An example .gitignore file could contain the following entries for ZeppelinOS :

# ZeppelinOS
zos.dev-*.json
.zos.session